这是这个故事中的学生。
Here's students in this story.

我们将看一下模块的真实硬件，这是我的政策。
We will take a look once the real hardware of the modules, and this is my policy.

这是第一个模块，第一个模块编号为零。
And this is the first module and this first module number is zero.

这是第二个模块，第二个模块的数量只是一个。
And this is the second module is number of this second module is just one.

这是管理员模拟到数字的第一个模块编号为零。
And this is the first module number of zero is for admins analog to digital.

所以这是一个输入模块。
So this is an input module.

这是我的数模模拟输出模块。
And this is my digital to analog analog output module.

好的。
OK.

这里我们有布线。
And here we have the cabling.

这里的这些电缆是什么？
And what is these cables in here?

我将在这里稍微介绍一下，您将看到 2 向前加和 2 向前减 8，您可以在这里看到。
I will go a little bit here and you will see two and forward plus and two and forward minus eight that you can see here.

好的。
OK.

所以我用这条电缆从我的电源转发，好吗？
So I get with this cable to forward from my power supply, OK?

它连接电源，这条棕色电缆用于转发。
It goes to power supply and this brown cable is to forward.

它是这些模块的外部电源，也是I.
It is the external power supply of these modules and also I.

绿色电缆连接至 2 伏和 4 伏负极。
The green cable is connected to two and four volt minus.

所以这是零零伏直流信号。
So this is the zero zero volt DC signal.

这是通往这里的桥梁。
It is the bridge to here.

好的，这个负号属于我的电源，这是模块外部电源的负号。
OK, this minus goes to my power supply, and this is the minus the external power supply of the module.

好的。
OK.

我们听到什么？
What we hear?

我们刚刚给出了两个并转发到这个模块。
We just gave two and forward to this module.

这些是第一件事，也是我所做的。
These are the first thing and what I did.

这是我的模拟量输出模块，模拟量输出模块通道一。
This is my analog output module, analog output module channel one.

都写到这里了
It's written into here.

你会看到这就是电缆的样子，我减去OK，我就是这样。
You will see this is the cable is the way I minus OK and I am.

减号是我走，我去这里，好吗？
Minus is I go, I go to here, OK?

您将看到连接到模拟输入模块的负号。
You will see is connected to a minus of the analog input module.

我们会怎样做？
What will we do?

我们会写。
We will write.

输出是来自该模块的模拟输出，我们将从该模拟输入模块读取数据，并且您将在此处看到加号。
An output is analog output from this module and we will read from this analog input module and the plus here you will see.

它连接到红色电缆。
It is connected to red cable.

这个。
This one.

好的。
Okay.

您将看到该策略已连接到红色电缆并将其替换为模拟输入模块即可。
You will see the policy is connected to red cable and it came to analog input modules to replace OK.

那么会发生什么呢？
So what will happen?

另外，模拟输出为电压连接到输入减去模拟输出连接到模拟输入模块。
Plus, analog output as voltage is connected to input minus analog output is connected to analog input module.

这是第一个模块零 Unalaq 输入。
This is the first module zero Unalaq input.

这是赢得第二个模块的第二个模块编号，我的脉搏现在已评级并与计算机连接。
This is the second module number of won the second module, and my pulse is now rated and I connected with the computer.

让我们进入编程方面。
And let's go to programming side.

据此我们看看运行是否完成？
And according to that, let's see is it complete the running or not?

好的？
OK?

对于本教程，我在这里完成了。
For this tutorial, I finished here.

内部音频见。
See you internal audio.